Quick Answer: Why Do I Have 2 Networks On My Router?

How do I set up a second router?

First router: Connect the Internet (or WAN) port to your modem.

Second router: Connect one of the other ports (not Internet or WAN) to the same port on the back of the first router.

If your ports on your routers are WAN, 1, 2, 3, 4, then connect the first and second router together in port 1..

Why does a router need 2 IP addresses?

7 Answers. An IP router has to have a minimum of 2 IP addresses, because its function is deciding on where to send the packet next. A minimal configuration of TCP/IP network where you need a router is a connection between two networks with different network part of the network addresses.

Why does my router have 3 IPS?

Having 3 IP addresses means that your system can be communicated with using three different IP addresses, and most likely means you have WiFi turned on and an Ethernet cable plugged in. One will be the loop back address (127.0. 0.1) and that is only useful on the system itself.

Can you use a 2nd wireless router?

It is possible to use a second router as a range extender to your existing network. It is also very possible to create only one network name between the two routers so your BluOS Players and other network devices will connect to which ever router has the stronger signal.

Can a router have 2 IP addresses?

Routers are special because they have two IP addresses. An IP address is assigned to each of the router’s two “interfaces”. … This is the side of the router that faces the Internet and has a public IP address. The second router interface is called the LAN (Local Area Network) interface.

Can having 2 routers cause problems?

No, two routers will not cause problems. If they are on the same (or close) channels, it may cause some slowdowns in performance tho, it’s best to get them on channels at least 6 apart, so no part of the bands overlap. … No, two routers will not cause problems.

Can I connect another router to my router?

You can connect one router to another router by two methods. Connect your secondary router’s WAN port to any one of the LAN ports in your primary router. This method should work without any issues mostly. … Connecting secondary router’s LAN port to any one of the LAN port of your primary router.

Why is my 5GHz slower than 2.4 GHz?

A 5GHz wireless LAN will almost always be slower than 2.4 GHz – the 5GHz frequencies are subject to greater attenuation so that you end up with a weaker signal at the same distance. Given the same levels of noise, a weaker signal results in a lower SNR (signal-to-noise ratio) and a lower quality connetcion.

How can I boost my WiFi signal on my second router?

You can easily extend your Wi-Fi network with additional networking hardware like Wi-Fi repeaters and Wireless Access Points. The other inexpensive option is that you get hold of an old wireless router, one that is longer in use, and connect it to your existing (main) router using an Ethernet (Cat5) cable.

Does having 2 routers increase Internet speed?

Will Adding a Router Increase Speed? Network bandwidth is much the same as a plumbing system. … If your Wi-Fi is slow, adding a second router can improve data flow if your Wi-Fi was slow, but it won’t help if your internet service was slow too. There are three components to a Wi-Fi network that all work together.

Can a router increase Internet speed?

If your router settings allow you, you might be able to prioritize one or the other for certain devices—the 5 GHz band will get you a faster connection to the internet, though it has a shorter range than 2.4 GHz.

Can a second router be used as a range extender?

If you have an old router sitting around, check with the manual to make sure the device can be converted into an extender or a repeater, and get specific instructions. … See if the router can use open-source firmware (like DD-WRT). If so, chances are that you can indeed use your old router as an extender.

Does 5GHz WIFI go through walls?

5GHz signals don’t travel as far and don’t penetrate walls as efficiently as 2.4GHz signals. … 5GHz signals don’t go as far and don’t penetrate as much as 2.4GHz signals do.

Is 5GHz faster than 2.4 GHz?

The 2.4 GHz band provides coverage at a longer range but transmits data at slower speeds. The 5 GHz band provides less coverage but transmits data at faster speeds. … However, higher frequencies allow data to be transmitted faster than lower frequencies, so the 5 GHz band allows you to upload and download files faster.

Can I have 2 networks on the same router?

Yes, it is possible to use two (or even more than two) routers on the same home network. … Conversely, a second router also helps when most clients in the home are wireless, but a few Ethernet devices in one room (like game consoles and file-sharing servers) could benefit from a wired setup.

Should I separate 2.4 GHz and 5ghz?

No. What you want to do, is get as many devices setup using 5Ghz, and use the 2.4Ghz as a fall-back. The reason is that because 2.4Ghz bands overlap, 2.4Ghz is usually very overcrowded with neighbour networks. 5Ghz allows a faster speed too depending on the specifications.

What is a 192.168 IP address?

192.168. 1.1 is a common factory IP address for a consumer-grade router. If the router is used for connecting to the Internet then all computers and devices which access the Internet through it will use this address as their default gateway.