Quick Answer: Which Three Advantages Are Provided By Static Routing?

What are two characteristics of IP choose two?

What are two characteristics of IP.

(Choose two.)does not require a dedicated end-to-end connection.operates independently of the network media.retransmits packets if errors occur.re-assembles out of order packets into the correct order at the receiver end.guarantees delivery of packets.

Explanation:The Internet Protocol (IP) is a connectionless, best effort protocol..

What are the three primary uses of static routing?

Static routing has three primary uses:ease of routing table maintenance in smaller networks with little growth or change.Routing to and from stub networks. A network accessed by a single route, and the router has only one neighbor.Single default route to represent a path to any network.

What is the characteristic of a default static route?

Static routes have a default administrative distance of 1. This route that has an administrative distance of 5 will not be placed into the routing table unless the previously entered static route to the 192.168. 10.0/24 goes down or was never entered.

What is static and dynamic routing?

In static routing, user defined routes are used in routing table. In dynamic routing, routes are updated as per the changes in network. … Static routing may not follow any specific protocol. Dynamic routing follows protocols like BGP, RIP and EIGRP.

What are two functions of dynamic routing protocols?

Dynamic routing protocols exist to discover the network, maintain routing tables, and calculate the best path. Having low levels of routing overhead, using the path specified by the administrator, and avoiding the exposure of network information are functions of static routing.

Is static IP faster than DHCP?

No, using static addresses is not magically faster than using DHCP addresses. … The same result could be accomplished by putting those two PCs onto the same IP subnet using DHCP rather than static ones.

What are the advantages and disadvantages of static and dynamic routing?

Table 3-2 Static Routing Advantages and DisadvantagesAdvantagesDisadvantagesVery secure. No advertisements are sent, unlike with dynamic routing protocols.Configuration complexity increases dramatically as the network grows. Managing the static configurations in large networks can become time consuming.3 more rows•Mar 24, 2014

Why is static routing more secure?

Static routes could be considered more secure. Because you aren’t learning any routes from any other routers over the network, there is no chance that an incorrect or unsecured route will be learned by your router.

What are two features of ARP?

What are two features of ARP? (Choose two.)When a host is encapsulating a packet into a frame, it refers to the MAC address table to determine the mapping of IP addresses to MAC addresses.An ARP request is sent to all devices on the Ethernet LAN and contains the IP address of the destination host and its multicast MAC address.More items…•

What is the use of static routing?

Static routing may have the following uses: Static routing can be used to define an exit point from a router when no other routes are available or necessary. This is called a default route. Static routing can be used for small networks that require only one or two routes.

What are two common types of static routes in routing tables?

There are two common types of static routes in a routing table, namely, a static route to a specific network and a default static route. A static route configured on a router can be distributed by the router to other neighboring routers.

What are the basic routing techniques?

Basic Routing TechniquesForwarding a message to one or more receiver systems (simply called Receivers from now on)Forwarding a message to different inbound interfaces of a receiver.Dividing a message into multiple submessages.

What are the types of routing?

There are 3 types of routing:Static routing – Static routing is a process in which we have to manually add routes in routing table.Default Routing – This is the method where the router is configured to send all packets towards a single router (next hop). … Dynamic Routing –

Is a static IP better?

Convenient remote access: A static IP address makes it easier to work remotely using a Virtual Private Network (VPN) or other remote access programs. More reliable communication: Static IP addresses make it easier to use Voice over Internet Protocol (VoIP) for teleconferencing or other voice and video communications.

What is a characteristic of a default static route group of answer choices?

What is a characteristic of a default static route? It uses a single network address to send multiple static routes to one destination address. It backs up a route already discovered by a dynamic routing protocol. It is configured with a higher administrative distance than is the original dynamic routing protocol.

What are two advantages of dynamic routing choose two?

The chief advantages of dynamic routing over static routing are scalability and adaptability. A dynamically routed network can grow more quickly and larger, and is able to adapt to changes in the network topology brought about by this growth or by the failure of one or more network components.

What are two function of a router?

Routers. We know that routers implement layer 3 or network layer functions. Their main job is to forward packets based upon a routing table. When doing so, they also provide traffic segmentation, multiple broadcast domains, and define network layer addressing subnets and networks.

What are two advantages of static routing over dynamic?

Static routing is more secure because it does not advertise over the network. Static routing scales well with expanding networks. Static routing requires very little knowledge of the network for correct implementation. Static routing uses fewer router resources than dynamic routing.

What are the different types of static routing?

The following types of IPv4 and IPv6 static routes will be discussed:Standard static route.Default static route.Summary static route.Floating static route.

What are two reasons why an administrator might choose to use static routing?

What are two reasons why an administrator might choose to use static routing rather than dynamic routing? (Choose two.)Static routing is easier to maintain in large networks.Static routing is more secure.Static routing is more scalable.Static routing uses less router processing and bandwidth.More items…•

How do you do static routing?

Steps of Configurations:Login configure page of router. … Type the username and password in the login page. … Click Advanced Routing button on the left side of the screen, then select Static Routing List(in 54Mbps Wireless Router, the name of button is Static Routing).Click Add New….