Quick Answer: Which Three 3 Are Types Of Routes Found In A Routing Table?

Why do we need routing?

Routing is the hub around which all of IP connectivity revolves.

At the simplest level, routing establishes basic internetwork communications, implements an addressing structure that uniquely identifies each device, and organizes individual devices into a hierarchical network structure..

Which three values can be included in the routing table of a router choose three?

The routing table consists of at least three information fields:network ID: The destination subnet.metric: The routing metric of the path through which the packet is to be sent. … next hop: The next hop, or gateway, is the address of the next station to which the packet is to be sent on the way to its final destination.

What are the types of routing?

There are two types of routes: static route and dynamic route. A router can learn these routes through two types of routing: static routing and dynamic routing, respectively.

Which three advantages are provided by static routing?

Static routing does not advertise over the network, thus providing better security. Configuration of static routes is error-free. Static routes scale well as the network grows. Static routing typically uses less network bandwidth and fewer CPU operations than dynamic routing does.

What is the aim of an ARP spoofing attack?

Anatomy of an ARP spoofing attack Generally, the goal of the attack is to associate the attacker’s host MAC address with the IP address of a target host, so that any traffic meant for the target host will be sent to the attacker’s host.

What is routing with example?

When a router receives an IP packet, the router checks its routing table and compares all available paths to get the destination network of the received IP packet and selects the fastest path from all available paths. RIP, IGRP, EIGRP, and OSPF are examples of routing protocols.

What routing table entry has?

What routing table entry has a next hop address associated with a destination network? Explanation: Routing table entries for remote routes will have a next hop IP address. The next hop IP address is the address of the router interface of the next device to be used to reach the destination network.

How do you read a routing table?

Each entry in the routing table consists of the following entries:the network and the subnet mask – specifies a range of IP addresses.the remote router – the IP address of the router used to reach that network.the outgoing interface – the outgoing interface the packet should go out to reach the destination network.

What are the two characteristics of IP?

What are two characteristics of IP? (Choose two.)does not require a dedicated end-to-end connection.operates independently of the network media.retransmits packets if errors occur.re-assembles out of order packets into the correct order at the receiver end.guarantees delivery of packets. Explanation:The Internet Protocol (IP) is a connectionless, best effort protocol.

Which two statements describe features of an IPv4 routing table on a router?

If there are two or more possible routes to the same destination, the route associated with the higher metric value is included in the routing table. The routing table lists the MAC addresses of each active interface. It stores information about routes derived from the active router interfaces.

What are the basic routing techniques?

Basic Routing TechniquesForwarding a message to one or more receiver systems (simply called Receivers from now on)Forwarding a message to different inbound interfaces of a receiver.Dividing a message into multiple submessages.