Quick Answer: What Is My IP And Subnet Mask?

How do I find my subnet mask?

In the Windows search fields, type cmd, to open command prompt.Press Enter.Type ipconfig/all press Enter.Find your network settings.Your PC’s IP address and your network Subnet Mask and Gateway will be listed..

How do subnets work?

Subnetting works by applying the concept of extended network addresses to individual computer (and another network device) addresses. … But because this is a Class C network, the default subnet mask of 255.255. 255.0 allows all computers on the network to be peers (to send messages directly to each other) by default.

What is subnet mask and why it is used?

A subnet mask is used to divide an IP address into two parts. One part identifies the host (computer), the other part identifies the network to which it belongs. To better understand how IP addresses and subnet masks work, look at an IP (Internet Protocol) address and see how it is organized.

What is my public IP?

The public IP address is the Internet Protocol address, logged by various servers/devices. This is when you connect to these devices through your internet connection. This is the same IP address that we show on our homepage. So why the secondary page?

How many 20 subnets are in a 16?

Class BNetwork BitsSubnet MaskNumber of Subnets/20255.255.240.016 (14)/21255.255.248.032 (30)/22255.255.252.064 (62)/23255.255.254.0128 (126)11 more rows

What are the 3 classes of subnet mask?

The three default subnet masks are 255.0. 0.0 for Class A, 255.255. 0.0 for class B, and 255.255. 255.0 for Class C.

How do you subnet?

That’s essentially what subnetting is; dividing blocks of IPs into smaller blocks. To do this you ‘borrow’ bits from the host range and add them to the subnetting bits. For example, you can split the above 255.255. 255.0 into 4 subnets with the subnet mask of 255.255.

What is my IP subnet mask and gateway?

Use the IPCONFIG Command Type “ipconfig” at the prompt and press “Enter.” This command displays all network interfaces and their configurations, including IP addresses, subnet masks and default gateway. … 255.0″ on a local area network.

Is subnet mask always 255?

hmm Almost every small network uses a subnet mask of 255.255. 255.0 and this allows for 255 IP addresses on that network. A subnet mask is a binary mask made up of all 1, contiguous.

What are the 4 parts of an IP address?

IPv4 addresses are usually represented in dot-decimal notation, consisting of four decimal numbers, each ranging from 0 to 255, separated by dots, e.g., 172.16.254.1. Each part represents a group of 8 bits (an octet) of the address.

How do I assign a subnet mask?

255.248 or /29.STEP 1: Convert to Binary.STEP 2: Calculate the Subnet Address. To calculate the IP Address Subnet you need to perform a bit-wise AND operation (1+1=1, 1+0 or 0+1 =0, 0+0=0) on the host IP address and subnet mask. … STEP 3: Find Host Range. … STEP 4: Calculate the Total Number of Subnets and Hosts Per Subnet.

Why subnets are used?

Subnetting ensures that traffic destined for a device within a subnet stays in that subnet, which reduces congestion. Through strategic placement of subnets, you can help reduce your network’s load and more efficiently route traffic.

What exactly is a subnet?

A subnet or subnetwork is a smaller network inside a large network. Subnetting makes network routing much more efficient.

How do I find my IP gateway?

How to Find Default Gateway IP Address on Android?Tap Settings.Tap Wi-Fi.Long tap your network connection.Tap Modify network.Tap Advanced options.Switch the IPv4 settings to Static.Find your gateway IP address listed next to Gateway.

What is a 24 bit subnet mask?

A class C network would have a subnet mask of 255.255. 255.0 which means that 24 bits are used for the network. In CIDR notation this is designated by a /24 following the IP address.

What is the default subnet mask?

Most home networks use the default subnet mask of 255.255. 255.0. However, an office network may be configured with a different subnet mask such as 255.255. 255.192, which limits the number of IP addresses to 64. Large networks with several thousand machines may use a subnet mask of 255.255.

What is a subnet example?

For example, 255.255.255.0 is the subnet mask for the prefix 198.51.100.0/24. Traffic is exchanged between subnetworks through routers when the routing prefixes of the source address and the destination address differ. A router serves as a logical or physical boundary between the subnets.

What is a 255.255 254.0 subnet?

255.255.254.0 = 23 bits mask = 510 hosts (512 -2 ) 255.255.252.0 = 22 bits mask = 1022 hosts (1024 -2 ) 255.255.248.0 = 21 bits mask = 2046 hosts (2048 -2) You always multiply by 2 or divide by 2..and remove 2 hosts (broadcast and network)

Why is subnet mask needed?

Also to be clear the purpose of the subnet mask is to determine which hosts are on the local network and which are outside of the network. Hosts can talk directly to hosts on the same network, but they need to communicate with a router to talk to hosts on external networks.

Is Gateway same as IP address?

The gateway has two IP address. One is an external IP address assigned by your ISP (internet service provider), and the other an internal IP address that is only accessible within your network. This internal IP address is also called you default gateway IP address (GW).