Quick Answer: What Is Meant By Subnet?

How do subnets work?

Subnetting works by applying the concept of extended network addresses to individual computer (and another network device) addresses.

But because this is a Class C network, the default subnet mask of 255.255.

255.0 allows all computers on the network to be peers (to send messages directly to each other) by default..

What are valid subnets?

The valid subnets are 64 and 128. … Answer: The valid hosts are the numbers between the subnet number and the mask. For the 64 subnet, the valid host range is 64-126. For the 128 subnet, the valid host range is 129-190.

What is subnet mask with example?

Subnet masks are also expressed in dot-decimal notation like an address. For example, 255.255. 255.0 is the subnet mask for the prefix 198.51. 100.0/24. Traffic is exchanged between subnetworks through routers when the routing prefixes of the source address and the destination address differ.

What is a 255.255 255.0 subnet?

A class C network would have a subnet mask of 255.255. 255.0 which means that 24 bits are used for the network. In CIDR notation this is designated by a /24 following the IP address.

How do you create a subnet?

In the Subnets tab, click Create. In the Create Subnet dialog box, specify subnet details, such as the name, subnet IP address or subnet mask, range of IP addresses, gateway address, and broadcast domain. You can specify the IP addresses as a range, as comma-separated multiple addresses, or as a mix of both.

How do I find my subnet?

Total number of subnets: Using the subnet mask 255.255. 255.248, number value 248 (11111000) indicates that 5 bits are used to identify the subnet. To find the total number of subnets available simply raise 2 to the power of 5 (2^5) and you will find that the result is 32 subnets.

How many subnets are there?

Class CNetwork BitsSubnet MaskNumber of Subnets/24255.255.255.00/25255.255.255.1282 (0)/26255.255.255.1924 (2)/27255.255.255.2248 (6)3 more rows

What is the subnet address?

Subnet addressing allows an autonomous system made up of multiple networks to share the same Internet address. For example, an organization can have a single Internet network address that is known to users outside the organization, yet it can configure its network internally into departmental subnets. …

What is the purpose of a subnet?

The main purpose of subnetting is to help relieve network congestion. Congestion used to be a bigger problem than it is today because it was more common for networks to use hubs than switches. When nodes on a network are connected through a hub, the entire network acts as a single collision domain.