Quick Answer: Can Different Subnets Be On The Same Switch?

How do you know if its the same subnet?

How to Tell if Phones and Computers on Same SubnetUsing the phone’s menu, navigate to Status > TCIP/IP parameters (may differ slightly from phone to phone—please consult manufacturer’s documentation).Write down both the phone’s IP address and subnet mask.Look up the network configuration for a computer on the network: …

Look at the subnet mask..

Can two VLANs have the same IP address?

The OSA-Express Layer 2 implementation allows the hosts to manage IP addresses and ARP cache, so it is possible to have a single guest LAN segment (or VSWITCH segment) where two different hosts use the same IP Address on different VLAN groups. …

Does a VLAN have an IP address?

VLANs do not really have IP addresses assigned to them. They have a network assigned to them, or a subnet, or a network range, however you want to refer to it. The address the OP supplied us is an assignable address within the range of 192.168. 4.1-255.

Should I use VLAN or subnet?

VLANs perceived to be more secure and provide more robust control for the network. Subnet has limited control in comparison to VLAN. VLAN is extremely flexible, it brings better work performance, less traffic, and more efficiency.

Is a VLAN a subnet?

At a high level, subnets and VLANs are analogous in that they both deal with segmenting or partitioning a portion of the network. However, VLANs are data link layer (OSI layer 2) constructs, while subnets are network layer (OSI layer 3) IP constructs, and they address (no pun intended) different issues on a network.

How do you check if computers are on the same network?

To check if there is a network connection between the two computers equipped with CodeTwo Outlook Sync, use the ping command:Open the Windows Start menu and launch the Command Prompt (e.g. by typing cmd and pressing Enter).In the Command Prompt, type the following command: ping

Can different subnets be on the same VLAN?

There’s really no reason not to put multiple subnets on the same VLAN, but there’s also probably no reason to do it. … Allows the subnets to talk directly without a router or firewall.

Can different subnets talk to each other?

Devices in different subnets can communicate. That is the purpose of a router. Routers route packets between different networks. Even if devices in different networks are on the same layer-2 broadcast domain, you need a router to let the devices communicate at layer-3.

How do you know if two devices are on the same network?

To determine that, you need to look at the route a packet would take from one machine to another. If both machines are connected to the Internet, and the IP addresses are routable, they are connected to the same network.

What is same subnet?

On TCP/IP networks, subnets are defined as all devices whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100. 100. would be part of the same subnet. Dividing a network into subnets is useful for both security and performance reasons.

Can you have 2 different subnets on the same switch?

Switches can carry as many subnets as you want them to because they don’t know, or care, about IP routing. It’s actually fairly common in small setups to have a router (“gateway”) with multiple IP addresses, one per subnet, on a single Ethernet port.

Can a switch have multiple IP addresses?

A unmanaged switch does not have an IP address. It is a ethernet switch and it switches ethernet packets and on the level of ethernet packets there are no IP addresses. … This will work, if 1) your modem allows multiple sessions at a time and b) your ISP allows you multiple sessions and multiple IP addresses at a time.