Question: What Characterizes A Floating Static Route?

What happens to a static route entry?

What happens to a static route entry in a routing table when the outgoing interface associated with that route goes into the down state.

The static route is removed from the routing table.

The router polls neighbors for a replacement route.

The static route remains in the table because it was defined as static..

What route would have the lowest administrative distance?

Explanation: The most believable route or the route with the lowest administrative distance is one that is directly connected to a router.

What is a characteristic of a default static route?

Static routes have a default administrative distance of 1. This route that has an administrative distance of 5 will not be placed into the routing table unless the previously entered static route to the 192.168. 10.0/24 goes down or was never entered.

How can you create a floating static route?

A Floating static route is a route that has a higher administrative distance then the current route in a routing table. Think of how a router works for a second; The routes that have a lower administrative distance number will be the ones installed into the routing table whereas higher AD numbers will not.

What is the purpose of a floating static route?

Floating static routes are static routes that have an administrative distance greater than the administrative distance of another static route or dynamic routes. They are very useful when providing a backup to a primary link, as shown in Figure 2-66.

Why would a floating static route be configured with an administrative distance?

why would a floating static route be configured with an administrative distance that is higher than the administrative distance of a dynamic routing protocol that is running on the same router? … the network administrator configures the router with the ip route 172.16.

What are the disadvantages of static routing?

The disadvantages of static routing include:They are not easy to implement in a large network.Managing the static configurations can become time consuming.If a link fails, a static route cannot reroute traffic.

What is summary route?

Route Summarization Overview. … Route summarization (also called route aggregation or supernetting) can reduce the number of routes that a router must maintain, because it is a method of representing a series of network numbers in a single summary address.

What are two reasons why an administrator might choose to use static routing?

What are two reasons why an administrator might choose to use static routing rather than dynamic routing? (Choose two.) Static routing is more secure. Static routing uses less router processing and bandwidth. A network administrator notices that a correctly entered static route is not in the routing table.

What is the difference between static route and default route?

Static Routing – This is the method by which an administrator manually adds routes to the routing table of a router. This is a method for small networks but it is not scalable for larger networks. Default Routing – This is the method where all routers are configured to send all packets towards a single router.

What is a characteristic of a floating static route?

What is a characteristic of a floating static route? When it is configured, it creates a gateway of last resort.​ It is used to provide load balancing between static routes. It is simply a static route with 0.0. 0.0/0 as the destination IPv4 address.

Which type of static route that is configured on a router uses only?

11. Which type of static route that is configured on a router uses only the exit interface? When only the exit interface is used, the route is a directly connected static route. When the next-hop IP address is used, the route is a recursive static route.

What does IP route 0.0 0.0 mean?

Explanation. IP route 0.0. 0.0 0.0. 0.0 Fa0/0 in plain English means “packets from any IP address with any subnet mask get sent to Fa0/0”. Without any other more specific routes defined, this router will send all traffic to Fa0/0.

How does a static route work?

Static routing is a form of routing that occurs when a router uses a manually-configured routing entry, rather than information from a dynamic routing traffic. … Unlike dynamic routing, static routes are fixed and do not change if the network is changed or reconfigured.

Which command is used to configure ipv6 static routes?

In Cisco Routers, IPv6 static routes can be configured using the following Cisco IOS command ipv6 route from Cisco IOS global configuration mode.

How do I add a static route?

Navigate to the Configuration > Network > IP > IP Routes page. Click Add to add a static route to a destination network or host. Enter the destination IP address and network mask (255.255. 255.255 for a host route) and the next hop IP address.

What is next hop in static route?

6.157 as the next-hop router’s IP address. A static IP route specifies the route’s destination address and the next-hop router’s IP address or routing switch interface through which the routing switch can reach the destination. (The route is added to the routing switch’s IP route table.)

What is standard static route?

A default static route is a route that matches all packets. A default route identifies the gateway IP address to which the router sends all IP packets that it does not have a learned or static route for. A default static route is simply a static route with 0.0. 0.0/0 as the destination IPv4 address.

What type of route allows a router to forward packets?

TCP/IP routingItemDescriptionhost routeDefines a gateway that can forward packets to a specific host on another network.network routeDefines a gateway that can forward packets to any of the hosts on a specific network.3 more rows

What is the next hop router’s IP address?

More specifically, next hop is an IP address entry in a router’s routing table, which specifies the next closest/most optimal router in its routing path. Every single router maintains its routing table with a next hop address, which is calculated based on the routing protocol used and its associated metric.

Why would a summarized static route be configured on a router?

Why would a summarized static route be configured on a router? A summary route represents multiple networks. A summarized static route does not necessarily provide a better route than a routing protocol does. A default static route would provide a default gateway for a router that is connected to an ISP.