Question: How Do I View Routing Table?

Which three are types of routes found in a routing table?

There are 3 types of routing:Static routing – Static routing is a process in which we have to manually add routes in routing table.Default Routing – This is the method where the router is configured to send all packets towards a single router (next hop).

Dynamic Routing –.

What is Genmask in routing table?

Genmask : The netmask for the destination net; 255.255. 255.255 for a host destination and 0.0. 0.0 for the default route. It’s called ‘genmask’ because it shows the ‘generality’ (i.e. the netmask) of the route.

What does C mean in routing table?

directly connected networkLike IPv4, a ‘C’ next to a route indicates that this is a directly connected network. An ‘L’ indicates the local route. In an IPv6 network, the local route has a /128 prefix. Local routes are used by the routing table to efficiently process packets with a destination address of the interface of the router.

What does D mean in routing table?

D: Identifies that the route was learned dynamically from another router using the EIGRP routing protocol. O: Identifies that the route was learned dynamically from another router using the OSPF routing protocol. R: Identifies that the route was learned dynamically from another router using the RIP routing protocol.

What is the use of routing table?

A routing table is a database that keeps track of paths, like a map, and uses these to determine which way to forward traffic. A routing table is a data file in RAM that is used to store route information about directly connected and remote networks.

How do I find the default route and routing table?

Click Start, click Run, type cmd in the Open box, and then click OK. Type route print, and then press ENTER to view the routing table. Note the interface number of the network interface that you re-added. Type route print to verify that the new default route appears in the routing table.

What is the default route in a routing table?

The default route denotes the packet forwarding rule that takes effect when no other route is configured for a specified IPv4 address. All packets with destinations that are not established in the routing table are sent to the destination specified by the default route.

How do I view the routing table in Windows?

To view the routing table (this is universal on all recent Windows versions) open a command prompt. The easiest way to do that is to go to Start->Run and type in “cmd” then click “OK.” Type in `route print -4.

What command do you use to display the routing table on a local system?

You can display the routing table’s contents with the netstat -nr command. The -r option tells netstat to display the routing table, and the -n option tells netstat to display the table in numeric form.

How do I view a routing table in Cisco?

Use the show ip route command with the mask argument to display routes with a specific network mask. Use the show ip route command with the bgp, isis, ospf keyword to display summary information about all routes for the specified protocol.

How do I display the ipv4 routing table?

Step 1: Record your PC information. On your PC, open a command prompt window and type the ipconfig /all command to display the following.Step 2: Display the routing tables. In a command prompt window type the netstat –r (or route print) command to display the host routing table.Step 3: Examine the Interface List.

How do you write a routing table?

Each entry in the routing table consists of the following entries:Network ID: The network ID or destination corresponding to the route.Subnet Mask: The mask that is used to match a destination IP address to the network ID.Next Hop: The IP address to which the packet is forwarded.Outgoing Interface: … Metric:

What does IP route 0.0 0.0 0.0 0.0 mean?

Explanation. IP route 0.0. 0.0 0.0. 0.0 Fa0/0 in plain English means “packets from any IP address with any subnet mask get sent to Fa0/0”. Without any other more specific routes defined, this router will send all traffic to Fa0/0.

“on-link” doesn’t equal 10.0. 0.138. It means that the destination network is directly attached to the interface – meaning traffic that matches this route entry will trigger an ARP request that should be sent from this link to resolve the destination IP directly (not the gateway 10.0. 0.138).