Question: How Do I Set Administrative Distance For A Static Route?

What is the administrative distance of a directly connected route?

An administrative distance is a number between 0 and 255, with the lower number being better.

The AD of 0 indicates the most trusted route (the directly connected network).

The AD of 255 means that the route will not be trusted..

Which type of route will tend to have the lowest metric?

The gateway / interface used is the route with the lowest metric. Router metrics are metrics used by a router to make routing decisions. It is typically one of many fields in a routing table. Metrics are used to determine whether one particular route should be chosen over another.

What is the difference between static and dynamic routes?

In static routing, user defined routes are used in routing table. In dynamic routing, routes are updated as per the changes in network. No complex algorithm used to figure out shortest path.

Do show ip route connected?

First, here’s the entire routing table of R2, outputted from the show ip route command. Next, here’s the output from using the show ip route connected command, which filters the output to just the directly connected routes in the routing table.

How can you create a floating static route?

To create floating static route(s) you will create identical routes that already exist which go to R2 through the main frame-relay link to traverse the point to point link which have a higher administrative distance so as long as Serial0/0 is up traffic will take that path but if Serial0/0 fails the router will re- …

Which command is used to configure ipv6 static routes?

In Cisco Routers, IPv6 static routes can be configured using the following Cisco IOS command ipv6 route from Cisco IOS global configuration mode.

Why would you use a static route?

Static routing is often used as a complement to dynamic routing to provide a failsafe backup in the event that a dynamic route is unavailable. Static routing is often used to help transfer routing information from one routing protocol to another (routing redistribution).

Why would a floating static route be configured with an administrative distance that is higher than the administrative distance of a dynamic routing P?

Explanation: Floating static routes are used as backup routes, often to routes learned from dynamic routing protocols. To be a floating static route, the configured route must have a higher administrative distance than the primary route.

What is standard static route?

A default static route is a route that matches all packets. A default route identifies the gateway IP address to which the router sends all IP packets that it does not have a learned or static route for. A default static route is simply a static route with 0.0. 0.0/0 as the destination IPv4 address.

What does IP route 0.0 0.0 0.0 0.0 mean?

Explanation. IP route 0.0. 0.0 0.0. 0.0 Fa0/0 in plain English means “packets from any IP address with any subnet mask get sent to Fa0/0”. Without any other more specific routes defined, this router will send all traffic to Fa0/0.

What is next hop in static route?

6.157 as the next-hop router’s IP address. A static IP route specifies the route’s destination address and the next-hop router’s IP address or routing switch interface through which the routing switch can reach the destination. (The route is added to the routing switch’s IP route table.)

How do I configure a static route?

Steps of Configurations:Login configure page of router. … Type the username and password in the login page. … Click Advanced Routing button on the left side of the screen, then select Static Routing List(in 54Mbps Wireless Router, the name of button is Static Routing).Click Add New….

Why would a floating static route be configured with an administrative distance?

why would a floating static route be configured with an administrative distance that is higher than the administrative distance of a dynamic routing protocol that is running on the same router? … the network administrator configures the router with the ip route 172.16.

How does a static route work?

Static routes are manually added to a routing table through direct configuration. Using a static route, a router can learn about a route to a remote network that is not directly attached to one of its interfaces.

What is the administrative distance of RIPv2?

120RIP’s administrative distance is 120 for both RIPv1 and RIPv2. RIPv2 sends routing updates via multicast address 224.0.

What is the administrative distance of a static route?

On Cisco routers, static routes have an administrative distance of 1, making them preferred over routes issued by a dynamic routing protocol. The administrative distance is a value that is always only referenced by the local router itself. The administrative distance is not advertised on the network.

What is a characteristic of a floating static route?

Explanation: A floating static route is a static route with an administrative distance higher than that of another route already in the routing table. If the route in the table disappears, the floating static route will be put into the routing table in its place.

How do I configure dynamic routing?

To configure dynamic routing:Choose Networking > Routing > Dynamic Routing.To configure how the router sends and receives RIP packets, choose the RIP direction:Choose the RIP version:RIP v2 authentication forces authentication of RIP packets before routes are exchanged with other routers.More items…