How Do I Create A Static Route On My Cisco Router?

How do I setup a static route on my router?

Steps of Configurations:Login configure page of router.

Type the username and password in the login page.

Click Advanced Routing button on the left side of the screen, then select Static Routing List(in 54Mbps Wireless Router, the name of button is Static Routing).Click Add New…..

How do I setup a static IP address?

To configure a static IP address using the touch screen:Tap the gear icon to open the System settings screen. If the control icons aren’t showing, tap anywhere on the touch screen.Tap Network. The Network settings page opens. … Tap Static IP Address. The Static IP Address configuration page opens.

How do I add a static route in Windows?

Add a Static Route to the Windows Routing Table You can use the following syntax:route ADD destination_network MASK subnet_mask gateway_ip metric_cost.route add 172.16.121.0 mask 255.255.255.0 10.231.3.1.route -p add 172.16.121.0 mask 255.255.255.0 10.231.3.1.route delete destination_network.route delete 172.16.121.0.

How do I assign an IP address to a Cisco switch?

Here are the steps to configure an IP address under VLAN 1:enter the VLAN 1 configuration mode with the interface vlan 1 global configuration command.assign an IP address with the ip address IP_ADDRESS SUBNET_MASK interface subcommand.enable the VLAN 1 interface with the no shutdown interface subcommand.More items…

Why would you use a static IP address?

Convenient remote access: A static IP address makes it easier to work remotely using a Virtual Private Network (VPN) or other remote access programs. More reliable communication: Static IP addresses make it easier to use Voice over Internet Protocol (VoIP) for teleconferencing or other voice and video communications.

Where do I get a static IP address?

You can assign these static IP addresses on the device itself—using, say, Windows’ network settings on each computer—or you can do it at the router level. Doing it at the router level is called assigning a DHCP reservation, though many people (and even some routers) still refer to it as a “static IP address.”

How do I add a static route?

Navigate to the Configuration > Network > IP > IP Routes page. Click Add to add a static route to a destination network or host. Enter the destination IP address and network mask (255.255. 255.255 for a host route) and the next hop IP address.

How do I create a route on a Cisco switch?

Step-by-Step InstructionsEnable routing on the switch with the ip routing command. … Make note of the VLANs that you want to route between. … Use the show vlan command in order to verify that the VLANs exist in the VLAN database. … Determine the IP addresses you want to assign to the VLAN interface on the switch.More items…•

How do I create a SVI file?

You start by creating the Layer 2 VLAN on the switch, and then assign an IP address on the VLAN Layer3 interface (SVI), just as you would on a physical router interface. The major difference here is that the SVI Layer 3 interface is virtual.

What is VLAN routing?

In a LAN environment, VLANs divide broadcast domains. When a host in one VLAN must communicate with a host in another VLAN, the traffic must be routed between them. This type of routing is called inter-VLAN routing. … The smart switch forwards an inbound multicast packet to all ports in the VLAN.

What is an example of a static IP address?

Another example of a static IP address at work is with DNS servers. DNS servers use static IP addresses so that devices always knows how to connect to them. If they changed often, you’d have to regularly reconfigure those DNS servers on your router or computer to use the internet.